HILCO HILCORD 600 - MIG/MAG Wires - EN: 14700: T Fe 6

Hilcord 600 is our seamless metal cored copper coated wire for wear resistant surfacing parts of steel, cast steel and high Mn-steel, subject to abrasion, metal-to-metal wear, impact and/or compression stresses. Deposit weld metal has a martensitic structure, hardness of pure weld deposit approx. 600HB. After welding the deposit can be machined by grinding only.

Best features

• Seamless metal cored copper coated wire: For wear resistant surfacing parts of steel, cast steel and high Mn-steel, subject to abrasion, metal-to-metal wear, impact and/or compression stresses
• Martensitic structure: Hardness of pure weld deposit approx. 600HB

Applications

Hilcord 600 is particularly suitable under conditions of heavy abrasion and friction, combined with impact. Ideally suitable for applications involving rolling, sliding and metal-to-metal wear.

Applications are universal but typical for hardfacing parts e.g. agricultural, earth moving and stone crushing industry, hardfacing crane and mine car wheels, sprockets and gear teeth, skip guides, dredger buckets, scrapper blades, transfertables, cable sheaves, tractor and shovel parts, dragline buckets, conveyor chains, hammer heads, clutch jaws.

Base materials to be welded:

• Aluminium-MgSi alloys
• Aluminium-Mg alloys up to 2,5% Mg
• Aluminium-MnCu alloys
• Aluminium-Si cast alloys
• Joining dissimilar aluminium alloys

Applications:

• General fabrication & construction (aluminium base metals)
• Shipbuilding & Offshore
• Repair & Maintenance